Introduction:
This machine adopts a fully automatic dishwasher controlled by circuit board, which is simple to operate. The machine is divided into two areas: main washing and rinsing. Different spraying angles ensure that washing and rinsing are more thorough. Induction devices are provided at the import and exit. When there are no staff or are temporarily not used, the machine will automatically stop working within the specified time and be in a waiting state, and the heating will be maintained. When there are no staff at the exit, the bowl and dish touch the induction device and the machine will automatically stop. This setting can reduce machine wear, extend machine life, and greatly reduce the cost of use.
Product parameters
model | External dimensions | Housing material | Conveyor belt material | Washing capability | |
YC-SW450-D | 4500*1050*2000mm | 1.2mm thick 304# stainless steel | nylon | 3000-4000 pieces per hour (stand flat) 6000-7000 pieces/hour (slant insert) | |
Washing water pump | Transmission motor | Wash and heat | Rinse and heat | Maximum power distribution | Voltage |
1. 85KW *2 | 0.75KW | 12KW*2 | 27KW | 55.45KW | 380V |
Water inlet | Water outlet | Electrical components | Install power control | ||
20mm | 50mm | Schneider | 160A/4P with leakage protection | ||